Motorsport Hardware Wheel Stud Kits

• Perfect for Track/Race applications!
• Certified by ISO/TS 16949 and ISO 9001 by TÜV
• Fast start nut installation on 68,75,82 and 92mm Studs 
• Made in Europe by OEM
• OEM Style Black Zinc Finish
• Allen Key insert for easy install
• 10.9 grade hardness
• 68mm Studs -- No spacers on all Elise/Exige/Evora 400/410/GT wheels
• 68mm Studs -- Accept up to 6mm spacers on S1 Evora wheels
• 75mm Studs -- Accept up to a 6mm spacers for Elise/Exige/Evora 400/410/GT Wheels
• 75mm Studs -- Accept up to 12mm on oem S1 Evora Wheels 
• 82mm Studs accept up to a 15mm spacers for Elise/Exige/Evora
• 90mm Studs accept up to a 25mm spacers for Elise/Exige/Evora
• Specs can vary depending on wheels that are installed. 
• Each kit comes complete for your vehicle (4-wheels)

Installation notes: 

Parts needed:
- 5mm Allen key/wrench
- Medium strength thread locker
- Socket set and Torque Wrench

Instructions:

1. Properly jack up the car and secure jack stand

2. Remove lug bolts and wheels

3. Clean wheel hub and lug holes of any debris

4. Apply 1 drop of thread locker on the short threaded side of the stud

5. Insert allen key all the way into the stud and install the stud

6. Torque the stud to 25 ft/lbs

7. Repeat steps 4-6 on the remaining studs on wheel hubs

8. Install wheel

9. Torque Lug nut to factory specs or 85 ft/lbs.