EBC SR11/SR21 Sintered Race Brake Pads for Evora 400,410, 430, GT, EMIRA

Regular price $333.99

Fitment for all 2017+ Evora 400, 410, 430, GT and Emira's 

SR11™…

EBC Sintered SR pads are in a class of their own.

Made in the USA plant of EBC Brakes, SR bites harder and lasts longer than anything without damaging rotors. There have been a few sintered pads around in the past but never like these.

With the transfer film technology employed in creating this compound, disc wear is almost totally eliminated. Being a “hard” pad in compressibility terms means pedal feel will also be better and more responsive.

Wear life is huge and tests have shown 3-5 times longer life than competitor semi-metallic pads.

The SR11™ medium friction compound is targeted for front of street base cars where high ABS effect exists on the car or for the front and rear of race cars with bias controls. SR is therefore only made in a limited range of ultra-fast street vehicle systems or for full race calipers from such as AP, Brembo, Alcon, and Wilwood which will launch in spring 2022.

The biggest advantage of SR is twofold….more bite, less fade, and the LOWEST cost per racing mile of any pad.

Another huge positive is the almost instant brake obtained from SR after merely matching the pads to the rotors the brakes are right there from the cold up to 900°C (Ambient – 1650°F)

There is NO CHEMICAL BEDDING on SR, you just fit them and race since there are no volatiles to burn off, another first in race brake technology

Dozens of top teams have run SR in 2021 and every single one has requested supplies for the 2022 racing season.

If you are serious about winning races, you must try this product.

Installation TIP – use SR21™ on the front and SR11™ on the rear



SR21™…

EBC Sintered SR pads are in a class of their own.

Made in the USA plant of EBC Brakes, SR bites harder and lasts longer than anything without damaging rotors. There have been a few sintered pads around in the past but never like these.

With the transfer film technology employed in creating this compound, disc wear is almost totally eliminated. Being a “hard “pad in compressibility terms means pedal feel will also be better and more responsive.

Wear life is huge and tests have shown 3-5 times longer life than competitor semi-metallic pads.

The SR21™ ultra-high friction compound is targeted for the front and rear of race cars with bias controls only. SR is therefore only made for full race calipers from such as AP, Brembo, Alcon, and Wilwood and will launch in spring 2022.

The biggest advantage of SR is twofold….more bite, less fade, and the LOWEST cost per racing mile of any pad.

Another huge positive is the almost instant brake obtained from SR after merely matching the pads to the rotors the brakes are right there from the cold up to 925°C (Ambient – 1697°F)

There is NO CHEMICAL BEDDING on SR, you just fit them and race since there are no volatiles to burn off, another first in race brake technology

Dozens of Top teams have run SR in 2021 and every single one has requested supplies for the 2022 racing season.

If you are serious about winning races, you must try this product.

Installation TIP – use SR21™ on the front and SR11™ on the rear